Скачать Phoenix Miner 5.5c - AMD+NVIDIA GPU Miner [2021]

file contains the link to download the .zip archive and the password (phoenix) to unlock it.

Inside the archive you will find a file README.txt with installation instructions.

Make sure to replace the pool and wallet address by what you’re using in all files.

ChangelogPermalink
The changes in this release (since 5.5b) include the following:

Added native kernels for AMD RX6700 GPUs. These are faster than the generic kernels and produce a lot less stale shares
Increase the max supported DAG epoch to 550 (should be enough to about Jan 2023)
Full support for setting clocks, fan speeds, voltages, and memory timings of AMD RX6900/6800/6700 cards
The specific hashrate is now shown in the form of kilo hashes per joule (kH/J). Example: if a GPU has hashrate of 30 MH/s with 100W power usage, the specific hashrate is 300 kH/J
Added new command-line parameters -ttj and -ttmem, allowing automatic fan speed control based on GPU hotspot (junction), and memory temperatures respectively. Example: -ttmem 83 will keep the GPU memory temperature at or bellow 83C by increasing the fan speed as necessary. These parameters can be combined with -tt, as well as with each other. These options are supported only on AMD GPUs that report junction and memory temperatures
Added new command-line parameters -tmaxj and -tmaxmem, allowing to decrease the GPU usage when the GPU hotspot (junction), or GPU memory temperatures are above the specified thresholds. These options are supported only on AMD GPUs that report junction and memory temperatures
Added support for AMD Windows drivers 21.3.2, and 21.3.1
Added support for AMD Linux drivers 20.50.x. Use this drivers only if you have Polaris or older GPUs, or the latest RX6x000 GPUs. WARNING: Vega, Radeon VII, and Navi GPUs won’t work with these drivers!
Turn off the zero fan feature on AMD cards whenever a fixed fan speed is used (e.g. -tt -40), or when an auto fan with min fan speed is used (e.g. -tt 63 -minfan 35). To disable this feature, add -fanstop 1 command-line parameter
When -mcdag 1 is specified under Linux, the miner will not wait for the daggen.sh script to finish before starting to generate the DAGs. Instead it will for a fixed 7 seconds. This allows you to do all the following in the daggen.sh: turn off the overclocking of Nvidia GPUs, sleep for 30-60 seconds to allow time for DAG generation, and then re-apply the overclocking of the Nvidia GPUs
Other small improvements and fixes
The support for -ttj, -ttmem, -tmaxj, and -tmaxmem for Nvidia 3090 and 3080 GPUs is not yet ready for release. We hope to have it ready for the final 5.6 release.

For more robust integrity check, you can use our GPG public key, which was verifyed with ETH transaction from our main devfee account as explained here.

Here are the signatures for the files in this release:


майнинг какие монеты
монеты для майнинга 2021
майнинг выгодных монет
майнинг монеты chia
новые монеты +для майнинга
майнинг 1 152
майнинг ферма
калькулятор майнинга
майнинг 2021
видеокарты +для майнинга
купить майнинг
rtx майнинг
майнинг gtx
майнинг биткоинов
майнинг эфира
настройка майнинга
майнинг ферма купить
майнинг криптовалюты
сколько майнинг
доходность майнинга
лучший майнинг
майнинг пул
облачный майнинг
асики +для майнинга
1660 майнинг
программы +для майнинга
chia майнинг
майнинг +на дисках
майнинг ti
2060 майнинг
msi майнинг
плата +для майнинга
3070 майнинг
материнская +для майнинга
видеокарты +для майнинга 2021
материнская плата +для майнинга
майнинг +на жестких
майнинг +на жестких дисках
разгон +для майнинга
1060 майнинг
майнинг без
калькулятор майнинга +по видеокартам
майнинг эфириума
карты +для майнинга
rtx 3060 майнинг
майнинг xt
gaming майнинг
game майнинг
580 майнинг
1660 super майнинг
под майнинг
майнинг отзывы
асики +для майнинга купить
gigabyte майнинг
калькулятор доходности майнинга